Liên hệ để báo giá

In Stock
  • Cung cấp thiết bị Huawei NetEngine NE40E-X8 Series Routers CR5P08BASA73.
  • Including NE40E-X8 Chassis, 2+1 Redundant 100G SRU/SFU.
  • 4 AC Power, without Software Charge and Document.
  • Hàng chính hãng 100%, bảo hành 12 tháng.
So sánh

Mô tả

Tổng quan về Huawei NetEngine NE40E-X8 Series Routers CR5P08BASA73

Huawei NetEngine40E series universal service router CR5P08BASA73 NE40E-X8 basic configuration includes NE40E-X8 Chassis, 2+1 Redundant 100G SRU/SFU, 4 AC Power supplies. The NE40E series universal service router (USR), a high-end network product, features line-rate forwarding capability, a well designed Quality of Service (QoS) mechanism, strong service-processing capability, and excellent expansibility and are usually deployed at the edges of Internet Protocol (IP) backbone networks, IP Metropolitan Area Networks (MANs), Internet Data Centers (IDCs) networks and other large-scale IP networks. It can provide comprehensive services for enterprises, residential as universal edge device.

Huawei NetEngine NE40E-X8 Series Routers CR5P08BASA73
Huawei NetEngine NE40E-X8 Series Routers CR5P08BASA73

Huawei CR5P08BASA73 also provides redundancy backup for key components. These key components support hot swapping and hot backup. The NE40E also uses technologies, such as non-stop routing (NSR), non-stop forwarding (NSF), and in-service software upgrade (ISSU), to ensure uninterrupted service forwarding. The NE40E supports packet buffering of 200 ms, ensuring no packet loss in the case of burst traffic. This guarantees high-quality service experience of users.

Thông số kỹ thuật Huawei NetEngine NE40E-X8 Series Routers CR5P08BASA73

Switching Capacity 7.08 Tbit/s
Forwarding Performance 2,880 Mpps
Number of Slots 11 slots, including
2 SRUs (1:1 backup), 1 SFUs
(2+1 backup), and 8 LPUs
Dimensions (W x D x H) 442 mm x 650 mm x 620 mm (14U)
Power Consumption (in full configuration) 4,100W (240G)
Weight (in full configuration) 136 kg (240G)
Interface Types 100 GE/40 GE



OC-192c/STM-64c POS




Channelized OC-3/STM-1

Channelized STM-4

OC-3c/STM-1c ATM

OC-12c/STM-4c ATM



IPv4 Support for static routing as well as dynamic routing protocols, such as RIP, OSPF, IS-IS, and BGP-4

Line rate forwarding on all interfaces in complex routing environments, for example, when route flapping occurs

IPv6 Various IPv4-to-IPv6 transition technologies: manual tunnel, automatic tunnel, 6to4 tunnel, GRE tunnel, and ISATAP tunnel

IPv4 over IPv6 tunnel and IPv6 Provider Edge (6PE)

IPv6 static routes and dynamic routing protocols, such as BGP4+, RIPng, OSPFv3, and IS-ISv6

IPv6 neighbor discovery, PMTU discovery, TCP6, ping IPv6, tracert IPv6, socket IPv6, static IPv6 DNS, IPv6 DNS server, TFTP IPv6 client, and IPv6 policy-based routing

Internet Control Message Protocol Version 6 (ICMPv6), Management Information Base (MIB), User Datagram Protocol Version 6 (UDP6) MIB, TCP6 MIB, and IPv6 MIB

L2NAT, NAT444, DS-Lite, and NAT64

MPLS MPLS TE and MPLS/BGP VPN, in compliance with RFC 2547

Inter-AS VPN Option A/B/C

Integration with Internet services

Martini and Kompella MPLS L2VPN

L2VPN techniques, such as VPLS and VLL

IP interworking over heterogeneous media

Multicast VPN


Layer 2 Features IEEE 802.1Q, IEEE802.1ad, IEEE 802.1D, IEEE 802.1w, and IEEE 802.1s

VLAN aggregation (super VLAN)

Filtering list based on MAC addresses and ports



Protection mechanisms such as IP/TE auto rerouting, IGP/BGP/multicast route convergence, VRRP, RRPP, IP-Trunk load balancing and backup, BFD, MPLS/Ethernet OAM, Y.1731, and routing protocol/port/VLAN damping

PW redundancy, E-Trunk, E-APS, and E-STP

In-service patching for smooth software upgrade

Passive backplane design

Redundancy backup for key components, such as route processing modules, SFUs, and power modules to guard against single points of failure

Switching between components that hot-back up each other


Hot swap of all components

QoS Well-designed HQoS and advanced scheduling and congestion avoidance technologies on each LPU

Accurate traffic policing and traffic shaping

Complex rule definition and fine-grained flow identification

MPLS H-QoS, ensuring QoS for MPLS VPN, VLL, and PWE3 services

8CT that combines MPLS TE and the DiffServ model

TE-tunnel-oriented QoS

OAM Y.1731, IP FPM, RFC 2544, MPLS OAM, 802.1ag, and 802.3ah, OPS
Multicast IGMPv1, IGMPv2, and IGMPv3

Multicast routing protocols, including PIM-DM, PIM-SM, PIM-SSM, Multicast Source Discovery Protocol (MSDP), and Multiprotocol BGP (MBGP)

Static multicast

Multicast CAC

Interoperability between multicast protocols

Processing of multicast policies based on multicast routing protocols and multicast forwarding

Multicast QoS and multicast replication for IPoE access users

Two-level multicast replication on the SFUs and LPUs to optimize the multicast effect

Security ACL-based packet filtering



DHCP snooping

ARP attack defense and DoS attack defense

MAC address limit and MAC-IP binding

Secure Shell (SSH) and SSH version 2 (SSH v2)


RIPv2, OSPF, IS-IS, and BGP MD5, SHA256, Keychain

Value-added Services IPsec tunnel

Distributed GRE tunnel

Distributed NetStream

High-precision NAT: CGN

Environment Requirements Long-term operating temperature: 0°C to 45°C

Short-term operating temperature: -5°C to 55°C

Long-term operating humidity: 5% RH to 85% RH

Short-term operating humidity: 0% RH to 100% RH

Operating altitude: ≤ 3,000 meters

_____Uy tín – Chất lượng_____


Địa chỉ: : 447/23 Bình Trị Đông, khu phố 5, phường Bình Trị Đông A, quận Bình Tân, Tp. Hồ Chí Minh

MST: 0314542250

Tel: [028] 22 535 496

Kinh doanh –  Hotline: 0902.966.449 – 0962.241.608

Mail: –


Website :