Cisco Aironet wireless 2700 Series Access Point AIR-CAP2702E-H-K9

Mô tả

Mô tả Cisco Aironet wireless 2700 Series Access Point AIR-CAP2702E-H-K9:

Bộ phát wifi Cisco Aironet AIR-CAP2702E-H-K9 access point là bô phát wifi chuẩn 802.11a/g/n/ac với antena được thiết kế ở bên ngoài thuộc dòng Cisco Aironet wireless 2700 Access Point. Bạn có thể gắn cisco wireless trên bàn hoặc trên tường sử dụng bộ kit đi kèm. Cisco Aironet AIR-CAP2702E-H-K9 hỗ trợ cả 2 dải tần là 2.4 GHz 3×4 802.11a/g/n/ac MU-MIMO và 5 GHz 3×4 802.11a/g/n/ac MU-MIMO.

Cisco AIR-CAP2702E-H-K9 Access Point sử dụng công nghệ mới nhất 802.11ac, cung cấp tốc độ lên tới 1.3Gbps ở dải tần 5GHz cho công suất và độ tin cậy cao hơn.

Cisco Aironet wireless 2700 Series Access Point AIR-CAP2702E-H-K9

Cisco wireless AIR-CAP2702E-H-K9 hỗ trợ công nghệ multiple-input multiple-output (MIMO) đa luồng cho phép truyền tải dữ liệu với nhiều sóng 802.11ac giúp cải thiện trải nghiệm của khách hàng. Công nghệ beamforming được tích hợp giúp cải thiện hiệu năng kết nối đến các thiết bị di động, bao gồm các thiết bị 1 2 và 3 luồng trên 802.11ac, đồng thời cải thiện tuổi thọ pin trên các thiết bị di động như điện thoại thông minh và máy tính bảng.

Thông số kỹ thuật Cisco Aironet AIR-CAP2702E-H-K9 Access Point:

Integrated antennas	– 2.4 GHz, gain 4 dBi, external omni, horizontal beamwidth 360° – 5 GHz, gain 4 dBi, external omni, horizontal beamwidth 360°
Interfaces	– 2×10/100/1000BASE-T autosensing (RJ-45) – Management console port (RJ-45)
Indicators	– Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Dimensions (W x L x H)	– Access point (without mounting bracket): 8.69 x 8.69 x 1.99 in. (22.1 x 22.1 x 5.1 cm)
Weight	– 2.2 lb (1.0 kg)
Environmental	– Nonoperating (storage) temperature: −22° to 158°F (-30° to 70°C) – Nonoperating (storage) altitude test: 25˚C, 15,000 ft. – Operating temperature: 32° to 104°F (0° to 40°C) – Operating humidity: 10% to 90% percent (noncondensing) – Operating altitude test: 40˚C, 9843 ft.
System	– 512 MB DRAM – 64 MB flash
Powering options	– 802.3at PoE+ – Enhanced PoE – Cisco AP2700 power injectors (AIR-PWRINJ4=) – Cisco AP2700 local power supply (AIR-PWR-B=) Note: If 802.3af PoE is the source of power, the access point will dynamically shift from 3×4 to 3×3 and come up under PoE.
Power draw	– AP2700: 15W Note: When deployed using a Power over Ethernet (PoE) specification, the power drawn from the power sourcing equipment will be higher by some amount dependent on the length of the interconnecting cable.
Physical security	– Torx security screw, included with the access point
Accessories	– Mounting bracket: AIR-AP-BRACKET-8= (available as spare) – Physical security kit: AIR-SEC-50= (sold separately), with 50 pcs. security screws used to secure the access point onto wall-mounting bracket, 50 pcs. RJ-45 caps and 2 pcs. unlock keys used to block physical access to Ethernet ports
Compliance	– Safety: UL 60950-1, CAN/CSA-C22.2 No. 60950-1, UL 2043, IEC 60950-1, EN 60950-1 – Radio approvals: FCC Part 15.247, 15.407, RSS-247 (Canada), EN 300.328, EN 301.893 (Europe), ARIB-STD 66 (Japan), ARIB-STD T71 (Japan), EMI and susceptibility (Class B), FCC Part 15.107 and 15.109, ICES-003 (Canada), VCCI (Japan), EN 301.489-1 and -17 (Europe), EN 50385 – IEEE standards: IEEE 802.11a/b/g, 802.11n, 802.11h, 802.11d, IEEE 802.11ac – Security: 802.11i, WPA2, WPA, 802.1X, AES – Extensible Authentication Protocol (EAP) types: EAP-Transport Layer Security (TLS), EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2), Protected EAP (PEAP) v0 or EAP-MSCHAPv2, EAP-Flexible Authentication via Secure Tunneling (FAST), PEAP v1 or EAP-Generic Token Card (GTC), EAP-Subscriber Identity Module (SIM) – Multimedia: Wi-Fi Multimedia (WMM) – Other: FCC Bulletin OET-65C, RSS-102
Software	Cisco Unified Wireless Network Software Release 7.6MR2 or later
Supported wireless LAN controllers	– Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst^® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex^® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco Virtual Wireless Controller – Cisco 5760 Wireless LAN Controller, Cisco Catalyst 3850 Series Switches, Cisco Catalyst 3650 Series Switches
802.11n version 2.0 (and related) capabilities	– 3×4 MIMO with three spatial streams – Maximal ratio combining (MRC) – 802.11n and 802.11a/g beamforming – 20- and 40-MHz channels – PHY data rates up to 450 Mbps (40 MHz with 5 GHz) – Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) – 802.11 dynamic frequency selection (DFS) – Cyclic shift diversity (CSD) support
802.11ac Wave 1 capabilities	– 3×4 MIMO with three spatial streams – MRC – 802.11ac beamforming – 20-, 40-, and 80-MHz channels – PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz) – Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) – 802.11 DFS – CSD support