Sản phẩm Huawei Indoor Access Point AP6750-10T

Mô tả

Mô tả tổng quan Huawei Indoor Access Point AP6750-10T

Huawei AP6750-10T is an access point (AP) that supports 802.11ac Wave 2, has built-in adaptive array antennas, and provides triple radios: one 2.4 GHz radio and two 5 GHz radios. The 2.4 GHz radio supports 2×2 MIMO and two spatial streams, one 5 GHz radio supports 2×2 MIMO and two spatial streams, and the other 5 GHz radio supports 4×4 MIMO and four spatial streams.

Thông số kỹ thuật Huawei Indoor Access Point AP6750-10T

AP6750-10T Specification
Dimensions (H x W x D)	47 mm x 220 mm x 220 mm
Weight	1.2 kg
Interface type	2 x 10/100/1000M adaptive Ethernet ports (RJ45) 1 x USB port
Built-in Bluetooth	BLE5.0
External IoT module	Support for IoT modules expanded through the USB port
LED indicator	Indicates the power-on, startup, running, alarm, and fault states of the system.
Power input	• DC: 12 V ± 10% • PoE power supply: in compliance with 802.3at.
Maximum power consumption	19.3 W (excluding output power consumption of the USB port) NOTE The actual maximum power consumption depends on local laws and regulations.
Operating temperature	-10°C to +50°C
Storage temperature	-40°C to +70°C
Operating humidity	5% to 95% (non-condensing)
Dustproof and waterproof grade	IP41
Altitude	-60 m to +5000 m
Atmospheric pressure	53 kPa to 106 kPa
Antenna type	Built-in adaptive array antennas (smart antennas)
Antenna gain	2.4 GHz: 3.5 dBi 5 GHz-0: 5 dBi 5 GHz-1: 5 dBi NOTE 1. The gains above are the single-antenna peak gains. 2. The equivalent antenna gain after all 2.4 GHz or 5 GHz antennas are combined is 1 dBi in 2.4 GHz, 2 dBi in 5 GHz-0, 3dBi in 5 GHz-1.
Maximum number of SSIDs for each radio	≤ 16
Maximum number of users	≤ 768 NOTE The actual number of users varies according to the environment.
Maximum transmit power	2.4 GHz: 23 dBm (combined power) 5 GHz-0: 24 dBm (combined power) 5 GHz-1: 27 dBm (combined power) NOTE The actual transmit power depends on local laws and regulations.
Power increment	1 dBm
Maximum number of non-overlapping channels	2.4 GHz (2.412 GHz~2.472 GHz) • 802.11b/g − 20 MHz: 3 • 802.11n − 20 MHz: 3 − 40 MHz: 1 5 GHz (5.18 GHz~5.825 GHz) • 802.11a − 20 MHz: 13 • 802.11n − 20 MHz: 13 − 40 MHz: 6 • 802.11ac − 20 MHz: 13 − 40 MHz: 6 − 80 MHz: 3 NOTE The table uses the number of non-overlapping channels supported by China as an example. The number of non-overlapping channels varies in different countries. For details, see the Country Codes & Channels Compliance
Safety standards	UL 62368-1 EN 62368-1 IEC 62368-1 GB 4943 EN 60950-1 UL 60950-1 CAN/CSA 22.2 No.60950-1 IEC 60950-1
Radio standards	ETSI EN 300 328 RSS-210 AS/NZS 4268 ETSI EN 301 893 FCC Part 15C: 15.247
EMC standards	EN 301 489-1 EN 301 489-17 ETSI EN 60601-1-2 FCC Part 15 ICES-003 YD/T 1312.2-2004 ITU k.20 GB 9254 GB 17625.1 AS/NZS CISPR22 EN 55022 EN 55024 CISPR 22 CISPR 24 IEC61000-4-6 IEC61000-4-2
IEEE standards	IEEE 802.11a/b/g IEEE 802.11n IEEE 802.11ac IEEE 802.11h IEEE 802.11d IEEE 802.11e IEEE 802.11k IEEE 802.11u IEEE 802.11v IEEE 802.11w IEEE 802.11r
Security standards	802.11i, Wi-Fi Protected Access 2(WPA2), WPA 802.1X Advanced Encryption Standards(AES), Temporal Key Integrity Protocol(TKIP) EAP Type(s)
EMF	CENELEC EN 62311 CENELEC EN 50385 OET65 RSS-102 FCC Part1&2 FCC KDB Series
RoHS	Directive 2002/95/EC & 2011/65/EU
Reach	Regulation 1907/2006/EC
WEEE	Directive 2002/96/EC & 2012/19/EU