Mô tả tổng quan Huawei Indoor Access Point AP7052DN
Huawei AP7052DN is the latest-generation technology-leading 802.11ac Wave 2 wireless access points (APs) that support 4×4 MIMO four spatial streams, and 2.4G-to-5G switchover. In dual-5G mode, the device rate can reach up to 3.46 Gbit/s. Both APs support smooth evolution from 802.11n to 802.11ac.
Thông số kỹ thuật Huawei Indoor Access Point AP7052DN
AP7052DN Specification
Dimensions (H x W x D)
52 mm x 220 mm x 220 mm
Weight
1.68 kg
Interface type
1 x 10/100/1000M self-adaptive Ethernet interface (RJ45)
1 x 100/1000M/2.5G/5G self-adaptive Ethernet interface (RJ45)
1 x Management console port (RJ45)
1 x USB interface
IoT slot
One slot, supporting extension using ZigBee and RFID modules
Built-in Bluetooth
BLE4.1
LED indicator
Indicates the power-on, startup, running, alarm, and fault status of the system.
Power input
DC: 42.5 V to 57 V
PoE power supply: in compliance with IEEE 802.3at/bt; dual PoE power supply.
Maximum power consumption
DC/802.3bt power supply: 33 W (Excluding the output power of the USB port)
802.3at power supply: 25.5 W (The USB function and the 5 Gbit/s mode of network ports are unavailable. The IoT card power is lower than 0.5 W.)
NOTE
The actual maximum power consumption depends on local laws and regulations.
In 802.3at power supply mode, radio power is managed in self-adaptive mode.
Operatingtemperature
–10°C to +50°C
Storage temperature
–40°C to +70°C
Operating humidity
5% to 95% (non-condensing)
Dustproof and waterproof grade
IP41
Altitude
–60 m to +5000 m
Atmospheric pressure
53 kPa to 106 kPa
Antenna type
built-in dual-band omnidirectional antennas
Antenna gain
2.4G / 5G (switchable): 2 dBi/ 2.8 dBi
5G (non-switchable): 2.8 dBi
Maximum number of SSIDs for each radio
≤ 16
Maximum number of users
≤ 512
NOTE
The actual number of users varies according to the environment.