Huawei Switches Series EH1Z03EACM00

Mô tả

Tổng quan về Huawei Switches Series EH1Z03EACM00

Huawei EH1Z03EACM00 is the Huawei S9703 Basic Engine AC Bundle (Including Assembly Chassis*1, MCUA Main Board*2, 800W AC Power*2, 48-Port 10/100/1000BASE-T Interface Card(X1E,RJ45)*1, Basic Software*1). The S9700 series terabit routing switches are high-end switches designed for next-generation campus networks and data centers to implement service aggregation. EH1BS9703E00 is only a chassis without any modules. The service cards, MPUs, fan module, power supply modules must be ordered separately.

Thông số kỹ thuật Huawei Switches Series EH1Z03EACM00

EH1Z03EACM00 Specifications
Series	Huawei S9703 Switch
Bundle	Huawei S9703 Basic Engine AC Bundle(Including Assembly Chassis1,MCUA Main Board2,800W AC Power2,48-Port 10/100/1000BASE-T Interface Card(X1E,RJ45)1,Basic Software*1)
Switching capacity	2.88 Tbit/s or 5.76 Tbit/s
Packet forwarding rate	2160 Mpps
Service slots	3
Wireless network management	Native AC AP access control, AP region management, and AP profile management Radio profile management, uniform static configuration, and centralized dynamic management Basic WLAN services, QoS, security, and user management
User management	unified user management 802.1x, MAC address, and Portal authentication Traffic- and time-based accounting User authorization based on user groups, domains, and time ranges
iPCA quality awareness	Marking real service packets to obtain real-time count of dropped packets and packet loss ratio Counting number of dropped packets and packet loss ratio on devices and L2/L3 networks
SVF 2.0 virtualization	Virtualizing access switches (ASs) and APs into one logical device to simplify management and maintenance Two layers of ASs allowed in an SVF system Third-party devices allowed between SVF parent and clients
VLAN	Supports adding access, trunk, and hybrid interfaces to VLANs Supports the default VLAN Supports VLAN switching Supports QinQ and selective QinQ Supports MAC address-based VLAN assignment
MAC address	Supports automatic learning and aging of MA C addresses Supports static, dynamic, and blackhole MAC address entries Supports packet filtering based on sour ce MAC addresses Supports MAC address limiting based on ports and VL ANs
STP/ERPS	Supports STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) Supports BPDU protection, root protection, and loop protection Supports BPDU tunnel ERPS (G.8032)
IP routing	Supports IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS Supports IPv6 dynamic routing protocols, such as, RIPng, OSPFv3, ISISv6, and BGP4+
Multicast	Supports IGMP v1/v2/v3, IGMPv1/v2/v3 snooping Supports PIM-SM, PIM-DM, PIM-SSM Supports MSDP, MBGP Supports prompt leave Supports multicast traffic control Supports multicast querier Supports suppression on multicast packets Supports multicast CAC Supports multicast ACL
MPLS	Supports basic MPLS functions Supports MPLS OAM Supports MPLS TE Supports MPLS VPN/VLL/VPLS
Reliability	Supports LACP and E-Trunk Supports VRRP and BFD for VRRP Supports BFD for BGP/IS-IS/OSPF/static route NSR, NSF, and GR for BGP/IS-IS/OSPF/LDP Supports TE FRR and IP FRR Supports Ethernet OAM (IEEE 802.3ah and 802.1ag) (Hardware level) HSR Supports ITU-Y.1731 Supports DLDP
QoS	Supports traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority Supports actions of ACL, CAR, re-mark, and schedule Supports queue scheduling algorithms, such as SP, WRR, DRR, SP+WRR, and SP+DRR Supports congestion avoidance mechanisms, such as WRED and tail drop Supports H-QoS Supports traffic shaping
Network synchronization	Ethernet synchronization 1588v2
Dimensions (H x W x D in mm)	175 x 442 x 489, 4U
Chassis weight(empty)	11 kg
Operating Voltage	DC: –40V to –72V AC: 90V to 290V
Power supply capability of the equipment	2200W