Huawei Switches Series S5730S-48C-PWR-EI

Mô tả

Tổng quan về Huawei Switches Series S5730S-48C-PWR-EI

Huawei S5730S-EI series switches are Huawei-developed next-generation enhanced gigabit Ethernet switch that provides flexible GE access ports and 10GE uplink ports. At the same time, it can provide one extension slot for 40GE card. Building on next-generation, high-performance hardware and the Huawei Versatile Routing Platform (VRP), the S5730S-EI supports intelligent stack (iStack), flexible Ethernet networking to help customers build scalable, manageable, reliable, and secure campus and data center networks.

Thông số kỹ thuật Huawei Switches Series S5730S-48C-PWR-EI

Item	Description
Fixed ports	24x1000BASE-T ports, 8x10GE SFP+ ports
Extended slot	One extended slot
Dimensions mm (W×D ×H)	442×420×44.4
Input voltage	AC:

	Rated AC voltage: 100-240 V AC; 50/60 Hz

	Max AC voltage: 90-264 V AC; 47-63 Hz



	DC:

	Rated DC voltage: -48-60 V DC;

	Max DC voltage: -38.4-72 V DC
Maximum power consumption (without card)	83.2 W (without PoE and extension card)

	967 W (with PoE, PoE: 739.2 W)
Operating temperature	0-1800 m altitude: -5°C to 50°C 1800-5000 m altitude: The operating temperature reduces by 1ºC every time the altitude increases by 220 m.
Relative humidity	5% to 95% (non-condensing)
Heat dissipation	Air cooling heat dissipation and intelligent speed adjustment
MAC address table	IEEE 802.1d standards compliance

	32K MAC address entries

	MAC address learning and aging

	Static, dynamic, and blackhole MAC address entries

	Packet filtering based on source MAC addresses
VLAN	4K VLANs

	Guest VLAN and voice VLAN

	GVRP

	MUX VLAN

	VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports

	1:1 and N:1 VLAN mapping function
Ethernet loop protection	RRPP ring topology and RRPP multi-instance

	Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protection

	SEP

	ERPS (G.8032)

	STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)

	BPDU protection, root protection, and loop protection
IP routing	Static routes, RIP v1/2, RIPng, OSPF, OSPFv3, IS-IS, IS-ISv6, BGP, BGP4+, ECMP, VRRP, VRRP6
IPv6 features	Neighbor Discover (ND)

	PMTU

	IPv6 Ping, IPv6 Tracert, IPv6 Telnet

	6to4, ISATAP

	ACLs based on source IPv6 addresses, destination IPv6 addresses, Layer 4 ports, or protocol types

	Multicast Listener Discovery snooping (MLDv1/v2)
Multicast	PIM-SM, PIM-DM, and PIM-SSM

	IGMP v1/v2/v3 snooping and IGMP fast leave

	Multicast forwarding in a VLAN and multicast replication between VLANs

	Multicast load balancing among member ports of a trunk Controllable multicast

	Port-based multicast traffic statistics
QoS/ACL	Rate limitation in the inbound and outbound directions of a port

	Packet redirection

	Port-based traffic policing and two-rate three-color CAR Eight queues on each port

	WRR, DRR, SP, WRR+SP and DRR+SP queue scheduling algorithms

	Re-marking of the 802.1p and DSCP fields of packets

	Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID

	Queue-based rate limitation and shaping on ports
Security	Hierarchical user management and password protection DoS attack defense, ARP attack defense, and ICMP attack defense

	Binding of the IP address, MAC address, port number, and VLAN ID Port isolation, port security, and sticky MAC

	MAC Forced Forwarding (MFF) Blackhole MAC address entries

	Limit on the number of learned MAC addresses

	IEEE 802.1x authentication and limit on the number of users on a port

	AAA authentication, RADIUS authentication, and HWTACACS authentication

	NAC

	SSH V2.0

	HTTPS CPU protection

	Blacklist and whitelist

	Attack source tracing and punishment for IPv6 packets such as ND, DHCPv6, and MLD packets

	Secure Boot
Management and maintenance	iStack

	Virtual cable test

	SNMP v1/v2c/v3

	RMON

	sFLOW