Line card Switch Cisco C6800-48P-SFP= 1GE module

Mô tả

Line card Switch Cisco C6800-48P-SFP 1GE fiber module

Item	Specification(s)
Transceiver Type	Small Form-factor Pluggable (SFP)
Ports/Interface/Connectors	48 port; 1000BASE-SX, LX/LH, -ZX, -T; 1000BASE-CWDM; LC connecter
Port Density/Chassis Model	– 240 ports/C6807-XL – 528 ports/6513E – 384 ports/6509E
Maximum Frame Size	Up to 9216 bytes/frame
(Tx = Transmit, Rx = Receive)	– Tx-1p3q8T – Rx-2q8T
Scheduler	Deficit Weighted Round Robin (DWRR)
Size per Port	– Rx-166KB – Tx-1.17MB
Onboard Memory	1GB Default
Standard protocols	– IEEE 802.1d, IEEE 802.1p, IEEE 802.1q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3x, IEEE 802.3z, IEEE 802.3ab, and IEEE 802.3ad – 1000BASE-T, 1000BASE-X (GBIC), 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-ZX, CWDM
Physical specifications	– Occupies one slot in the Cisco Catalyst 6807-XL or one slot in the 6500 E-Series chassis – Dimensions (H x W x D): 1.2 x 14.4 x 16 in. (3.0 x 35.6 x 40.6 cm)
Environmental conditions	Temperature: – Operating temperature: 32 to 104°F (0 to 40°C) – Storage temperature: -40 to 167°F (-40 to 75°C) – Relative humidity 10 to 90% noncondensing Operating altitude: – Agency-certified for operation: -500 to 6500 ft (-150 to 2000m) – Designed and tested for operation -500 to 10000 ft (-150 to 3000m)
NEBS criteria levels	SR-3580 Issue 3, June 2007 (GR-63-CORE, issue 3, and GR-1089-CORE, issue 4)
ETSI	– ETS 300 019-2-1, Class 1.1 Storage – ETS 300 019-2-2, Class 2.1 and 2.2 Transportation – ETS 300 019-2-3, Class 3.1E Stationary Use
Regulatory Compliance	EMC Compliance: – FCC Part 15 (CFR 47) Class A – VCCI Class A with UTP, Class B with STP – EN55022 Class A with UTP, Class B with STP – CISPR 22 Class A with UTP, Class B with STP – CE marking – AS/NZS 3548 Class A with UTP, Class B with STP Safety Compliance: – UL 1950 – CSA C22.2 No.950 – EN 60950 – IEC 950 – AS/NZS 3260 – IEC 825 – EN 60825 – 21CFR1040
Network management	– ETHERLIKE-MIB (RFC 1643) – IF-MIB (RFC 1573) – Bridge MIB (RFC 1493) – CISCO-STACK-MIB – CISCO-VTP-MIB – CISCO-CDP-MIB – RMON MIB (RFC 1757) – CISCO-PAGP-MIB – CISCO-STP-EXTENSIONS-MIB – CISCO-VLAN-BRIDGE-MIB – CISCO-VLAN-MEMBERSHIP-MIB – ENTITY-MIB (RFC 2037) – HC-RMON – RFC1213-MIB (MIB-II) – SMON-MIB
Power Requirements	– C6800-48P-SFP and C6800-48P-SFP-XL: 334.44 and 339.44 Watts respectively – C6800-48P-TX and C6800-48P-TX-XL: 405 and 410 Watts respectively – Go to https://www.cisco.com/go/powercalculator for easy power consumption calculation
Indicators	– Status: green (operational), red (faulty), and orange (module booting) – Link: green (port enabled and connected), orange (port disabled), and off (port enabled and not connected)