- Recent add item(s)
-
Cisco 3845 cũ giá rẻ 1 × 8.350.000 ₫×
-
Firewall ASA5520-BUN-K9 cũ giá rẻ 1 × 12.430.000 ₫×
Tổng số phụ: 20.780.000 ₫
Liên hệ để báo giá
In StockCisco Product # : CPAK 100GBASE-ER4L
Cisco Part Number : CPAK 100GBASE-ER4L
Made In (COO) : Malaysia
Bảo hành : 24 tháng 1 đổi 1
Module quang Cisco CPAK 100GBASE-ER4L là module quang cho môi trường truyền dẫn Single Mode với bước sóng là 1310nm, khoảng cách truyền dẫn tối đa là 25km, sử dụng đầu kết nối SC, Module quang CPAK 100GBASE-ER4L hỗ thay thế nóng.
Điều đó có nghĩa là cho phép bạn thay thế, cắm module CPAK 100GBASE-ER4L vào các thiết bị chuyển mạch (Switch), thiết bị định tuyến (Router) của cisco mà không cần phải tắt thiết bị hoặc khởi động lại thiết bị, mà thiết bị tự nhận và active để hoạt động luôn khi module CPAK 100GBASE-ER4L được cắm vào.
Vì CPAK 100GBASE-ER4L là module quang Single Mode do vậy để đảm bảo CPAK hoạt động được thì mọi thứ phải đồng bộ, tức là cáp quang truyền dẫn, dây nhẩy, dây đuôi chuột (Pigtail) phải là Single Mode.
Cisco CPAK 100GBASE-ER4L được dùng để thiết kế mạng LAN với các khoảng cách truyền dẫn trong phạm vi 25km, ví dụ như: giữa các tầng trong một tòa nhà, giữa các tòa nhà. CPAK 100GBASE-ER4L cung cấp tốc độ truyền dẫn 100G quang do vậy chúng ta có thể sử dụng module CPAK 100GBASE-ER4L để làm uplink truyền dẫn dữ liệu tin cậy cho một phần vùng / một nhóm user (người sử dụng) với số lượng là 20 – 4000 users (điều này còn tùy thuộc vào yêu cầu truy xuất dữ liệu của các User).
Module quang CPAK 100GBASE-ER4L có thể dùng để nối giữa các Switch, giữa các thiết bị Core hoặc thiết bị cần truyền dẫn tốc độ cao, hoặc giữa các Datacenter.
Requirement | Cisco CPAK Module Supporting Feature |
Accommodate ever-growing bandwidth requirements | Up to 10 100-Gigabit Ethernet connections deliver as much as 1 Tbps of front-panel bandwidth |
Control costs | Form factor consumes 40% less power than CFP2 and 70% less power than CFP form factors |
Real estate conservation | Minimal footprint allows 20% greater port density and bandwidth than competing products |
High availability for business continuity | Hot-swappable input/output device plugs into a Cisco CPAK-module-based switch, router, or optical platform port |
Accommodate a variety of distance and fiber type requirements | Flexible interface choices |
Investment protection, affordable migration to higher bandwidth | ● Support for a “pay-as-you-grow” model ● Can plug any Cisco 100-Gbps, 40-Gbps, and 10-Gbps line cards into Cisco CPAK modules (supports the Cisco AnyPort solution) |
Manage performance | Digital optical monitoring (DOM) support |
Standards compliance for equipment flexibility and choice | Interoperability with any IEEE-compliant: 100GBASE-SR4, 100GBASE-LR4, 100GBASE-SR10, 40GBASE-SR4, 10GBASE-SR, 10GBASE-LR |
MSA compliant to: 100GBASE CWDM4 | |
Proper functioning and high performance with all Cisco platforms | Cisco quality identification (ID) feature enables a Cisco platform to identify whether the module is certified and tested by Cisco |
Cisco CPAK Module | Wavelength (nm) | Cable Type | Core Size (Microns) | Modal Bandwidth (MHz*km)a | Cable Distanceb |
Cisco CPAK 100GBASE-ER4Lite | 1310 | SMF Duplex | 9-micron core SMF per G.652 |
– | 25 km |
Cisco CPAK modules are supported on Cisco high-end switches, routers, and transport equipment:
● ASR 9000 Series Router
● CRS-X Carrier Routing System
● NCS 2000, 4000, and 6000 Series Routers
● Nexus 7000 and 7700 Series Switches
● Cisco ONS Transport Platform
Connectors and Cabling
●Dual SC/PC connector (Cisco CPAK 100GBASE-LR4 and Cisco CPAK 100GBASE-ER4 Lite module). For duplex SMF modules, only connections with patch cords terminated with PC or UPC connectors are supported.
●Dual LC connector (CPAK 100GBASE CWDM4 module). For duplex SMF modules, only connections with patch cords terminated with PC or UPC connectors are supported.
●24-fiber MPO/MTP connector (Cisco CPAK 100GBASE-SR10 module receives a female MPO/MTP-24 connector) Spring force required is 20N.
● 24-fiber MPO/MTP connector (Cisco CPAK 10x10G-LR and CPAK-10X10G-ERL modules receive a female MPO/MTP-24 APC connector). The MPO-24 SMF APC connector used on the CPAK-10X10G-LR and CPAK-10X10G-ERL has been designed to be compliant to IEC 61754-7-1, dated 2008-03. The standard specifies a nominal spring force of 10N for the connector. Performance of these devices is specified with the use of connectors with a 10N spring force. Customers should be careful not to use 22N spring force connectors at this time. Performance of the modules is not guaranteed with the higher spring force.