Huawei Switches Series S3700-52P-EI-DC
Liên hệ để báo giá
In Stock- Cung cấp thiết bị Huawei Switches Series S3700-52P-EI-DC.
- 48 Ethernet 10/100 ports, 4 Gig SFP, DC.
- Hàng chính hãng 100%, bảo hành 12 tháng.
Mô tả
Mô tả tổng quan Huawei Switches Series S3700-52P-EI-DC
Huawei Quidway S3700 series enterprise switches are next-generation energy-saving Layer 3 switches. S3700 mainly deploys on an enterprise campus network. S3700 supports VLAN, PoE, routing and migration to an IPv6 network. S3700 uses advanced reliability technologies such as stacking, VRRP, and RRPP, enhancing network reliability and diversity.
Thông số kỹ thuật Huawei Switches Series S3700-52P-EI-DC
Item | Description |
Fixed port | 48*10/100Base-TX ports, 2*100/1000Base-X SFP ports, and 2*1000Base-X SFP ports |
Forwarding performance | 13.2 Mpps |
MAC address table | Supports IEEE 802.1d compliance. |
Supports 16K MAC address entries. | |
Supports MAC address learning and aging. | |
Supports Static, dynamic, and blackhole MAC address entries. | |
Packet filtering based on source MAC addresses | |
VLAN features | Supports 4K VLANs |
Supports Guest VLANs, voice VLAN, and super VLAN | |
Supports VLAN assignment based on MAC addresses, protocols, and IP subnets | |
Supports QinQ | |
Supports Selective QinQ | |
Supports 1:1 VLAN mapping | |
Supports N:1 VLAN mapping | |
Reliability | Supports RRPP (ring topology, intersecting rings, and multi-instance), implementing protection switchover within 50 ms |
Supports Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover | |
Supports STP(IEEE 802.1d), RSTP(IEEE 802.1w), and MSTP(IEEE 802.1s) Supports BPDU protection, root protection and loop protection |
|
Supports Smart Ethernet Protection (SEP) | |
BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM | |
IP routing | Supports Static routing, RIPv1, RIPv2, and ECMP |
OSPF, IS-IS, and BGP | |
IPv6 features | Supports Neighbor Discovery (ND) |
Supports Path MTU (PMTU) | |
Supports IPv6 ping, IPv6 tracert, and IPv6 Telnet | |
Supports Manually configured tunnel | |
Supports 6 to 4 tunnel | |
Supports ISATAP tunnel | |
Supports ACLs based on source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type |
|
Supports MLD v1/v2 snooping | |
Multicast | Supports 1 K multicast groups |
Supports IGMP v1/v2/v3 snooping and IGMP fast leave | |
Supports Multicast VLAN and multicast replication between VLANs | |
Supports Multicast load balancing among member ports of a trunk | |
Supports Controllable multicast | |
Supports Port-based multicast traffic statistics | |
IGMP v1/v2/v3, PIM-SM and PIM-SSM | |
QoS/ACL | Supports Rate limiting on packets sent and received by an interface |
Supports Packet redirection | |
Supports Port-based traffic policing and two-rate three-color CAR | |
Supports Eight queues on each port | |
Supports WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms | |
Supports Re-marking of the 802.1p priority and DSCP priority | |
Supports Packet filtering on Layers 2 through 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination | |
Supports IP address, port number, protocol type, and VLAN ID | |
Supports Rate limiting in each queue and traffic shaping on ports | |
Security & access | Supports User privilege management and password protection |
Supports DoS attack defense, ARP attack defense, and ICMP attack defense | |
Supports Binding of the IP address, MAC address, interface, and VLAN | |
Supports Port isolation, port security, and sticky MAC | |
Supports Blackhole MAC address entries | |
Supports Limit on the number of learned MAC addresses | |
Supports 802.1x authentication and limit on the number of users on an interface | |
Supports AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC | |
Supports SSH v2.0 and CPU defense | |
Supports Blacklist and whitelist | |
Supports DHCP Server, DHCP Relay, DHCP Snooping, DHCP Security | |
Surge protection | 6KV surge protection capability on service ports (1KV on service ports on PoE devices) |
Management and maintenance | Supports iStack and MAC Forced Forwarding (MFF) |
Supports Remote configuration and maintenance using Telnet | |
Supports Auto-Config.and Virtual cable test | |
Supports Ethernet OAM (IEEE 802.3ah and 802.1ag) | |
Supports SNMP v1/v2c/v3 and RMON | |
Supports MUX VLAN,GVRP and Web NMS | |
Interoperability | Supports VBST (Compatible with PVST/PVST+/RPVST) |
Supports LNP (Similar to DTP) | |
Supports VCMP (Similar to VTP) | |
Operating environment | Operating temperature: 0°C to 50°C(long term); Relative humidity: 10%–90% (non-condensing) |
Power supply | DC: Rated voltage range: –48 V to –60 V DC Maximum voltage range: –36 V to –72 V DC Note: PoE-support switches do not use DC power supplies |
Dimensions (mm) | 442 (W) x 220 (D)x 43.6 (H) |
Weight | <3Kg |
Power consumption | < 38W |
_____Uy tín – Chất lượng_____
CÔNG TY TNHH THƯƠNG MẠI DỊCH VỤ NÉT VIỆT PRO
Địa chỉ: : 447/23 Bình Trị Đông, khu phố 5, phường Bình Trị Đông A, quận Bình Tân, Tp. Hồ Chí Minh
MST: 0314542250
Tel: [028] 22 535 496
Kinh doanh – Hotline: 0902.966.449 – 0962.241.608
Mail: kinhdoanh@ciscoshop.vn – pronetviet@gmail.com
Skype: netvietpro.com
Website : www.netvietpro.com – www.ciscoshop.vn – www.phukienquang.com.vn