Finisar’s FCLF8522P2BTL 1000BASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA)1 . They are compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE Std 802.3. The transceiver is RoHS compliant and per Directive 2011/65/EU3 and Finisar Application Note AN-2038. The 1000BASE-T physical layer IC (PHY) can be accessed via I2C, allowing access to all PHY settings and features.
The FCLF8520P2BTL uses the SFP’s RX_LOS pin for link indication, and 1000BASE-X autonegotiation should be disabled on the host system. The FCLF8521P2BTL is compatible with 1000BASE-X auto-negotiation, but does not have a link indication feature (RX_LOS is internally grounded). See AN-2036, “Frequently Asked Questions Regarding Finisar’s 1000BASE-T SFPs”, for a more complete explanation on the differences between the two models and details on applications issues for the products. The FCLF8522 shall support both RX_LOS pin for link indication and 1000BASE-X auto-negotiation.
Key Features
Up to 1.25Gb/s bi-directional data links
Hot-pluggable SFP footprint
Extended case temperature range (-40°C to +85°C )
Fully metallic enclosure for low EMI
RoHS compliant and Lead Free
Low power dissipation (1.05 W typical)
Compact RJ-45 connector assembly
Access to physical layer IC via 2-wire serial bus
10/100/1000 BASE-T operation in host systems with SGMII interface
____Uy tín – Chất lượng_____
NetVietPro
CÔNG TY TNHH THƯƠNG MẠI DỊCH VỤ NÉT VIỆT PRO
Địa chỉ: 447/23 Bình Trị Đông, khu phố 5, phường Bình Trị Đông A, quận Bình Tân, Tp. Hồ Chí Minh
Hoạt động với Cisco Catalyst 2851, 3650, 3745, 3750 và 3850.
PN: 72-2632-01
stackable là công nghệ cho phép ta gộp 2 hay nhiều Sw cisco lại với nhau (các sw cùng platform), việc cấu hình lúc này sẽ diễn ra trên sw nào cũng được.
Manufacturer: ProLabsType: V.35 cable ( DTE )Length: 3 mConnector(s): 1 x 26 pin Smart Serial – maleConnector(s) (Other Side): 1 x 34 pin M/34 (V.35) – male
Một trong những bộ phận quan trọng của việc thiết lập bất kỳ bộ định tuyến là việc lựa chọn các loại cáp nối tiếp để kết nối router với các thiết bị nối tiếp trong mạng của bạn.
Cisco cung cấp một V.35, DTE Male to Smart Serial, 10 Feet cáp cho Cisco 2600 – WIC-2T và 2A / S.